Shiro ADSL 2/2+ Ethernet Modem Manual de usuario Pagina 602

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 638
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 601
)*+,,*
-./


!
))0+)01++,
=!
)(+
42!
+10
STLF-NA-TRD-REQ-4520 The Management Station shall assign timeslots to the Service Provider so
that the PMT and the Programs are broadcast to the configured downlinks if
there is capacity available in the system.
T AAS-F - NCC_STL_SESSION_040
STLF_IF_DTV_SPRCST_SP_INTG4
-
STLF-NA-TRD-REQ-4530
(OPT)
SatLife system shall permit to broadcast pre-scrambled signals and
unscramble this signal on reception.
OPT - -
STLF-NA-TRD-REQ-4540
(OPT)
The encryption process shall be performed by a CA system placed in front of
the VSP in charge of the generation of the CAT table and all EMM and ECM
needed to unscramble the signal.
OPT - -
STLF-NA-TRD-REQ-4550 SatLife system shall support an interactive channel using a RCST connected
to the IRDs.
T STLF_IF_SERV_NVOD -
STLF-NA-TRD-REQ-4560 The Interactive channel between the RCST of the IRD and the RSGW or the
RCST destination shall be based on a Low Priority connection to avoid
losing any packet. This will be done by configuration of the type of flow of the
RCST accordingly.
A - -
STLF-NA-TRD-REQ-4570 SatLife system shall be able to broadcast interactive applications multiplexed
with the video and to execute them in IRDs that support certain features.
T TID STLF_IO_DTV_APP
STLF-NA-TRD-REQ-4580
(OPT)
The interactive applications shall be broadcast using DVB-MHP protocol as
defined in [1].
T STLF_LS_CSP_DTV_005 STLF_IO_DTV_APP
STLF-NA-TRD-REQ-4590
(OPT)
The VSP shall be able to transmit DVB-MHP applications interleaved with the
video and compliant with [ETSI TS 102 812].
OPT - STLF_IO_DTV_APP
STLF-NA-TRD-REQ-4600
(OPT)
SatLife system shall transmit the AIT Table as a table of category 4. This
means that the table will be sent directly from the VSPs to the IRDs without
intervention of the NCC.
OPT - STLF_IO_DTV_APP
STLF-NA-TRD-REQ-4610
(OPT)
Each VSP shall use only one PID for the transmission of the AIT and only for
this purpose (the NCC does not need to assemble this table).
OPT - STLF_IO_DTV_APP
STLF-NA-TRD-REQ-4620
(OPT)
SatLife system shall assign a unique PID per SP for the transmission of the
Application Information Table.
OPT - STLF_IO_DTV_APP
STLF-NA-TRD-REQ-4630 The cardinality of the relationship between VSP and IAS shall be 1:1. Only
one Interactive Application Server can be associated to a VSP. Otherwise
more than one PID should be reserved per VSP for the transmission of the
AIT.
T - STLF_IO_DTV_APP
Vista de pagina 601
1 2 ... 597 598 599 600 601 602 603 604 605 606 607 ... 637 638

Comentarios a estos manuales

Sin comentarios