Shiro ADSL 2/2+ Ethernet Modem Manual de usuario Pagina 599

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 638
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 598
)*+,,*
-./


!
))0+)01++,
=!
)(+
42!
*220
STLF-NA-TRD-REQ-4300 The transport streams to which the programs have to be broadcast shall be
configurable in the Management Station.
T AAS-F : Transport streams are
configured for each PAT in XML
configuration file and read by the NCC at
start up (in the same way as in the
AmerHis system).
Tested in the scope of NCC AmerHis
-
STLF-NA-TRD-REQ-4310 The VSPs shall allow the possibility to configure the PID of the PAT. This PID
could be the same that the PID used for the transmission of the tables of
category 3
T AAS-F : PAT PID is configured in XML
configuration file and read by the NCC at
start up (in the same way as in the
AmerHis system).
Tested in the scope of NCC AmerHis
SP_TABLES_PID_REALLOC
-
STLF-NA-TRD-REQ-4320 SatLife system shall transmit the assembled tables of category 2 to the
beams at the rate indicated next:
- Table: PAT
- Category: 2
- Type: PSI
- Max Number: 4 (1 per D/L TDM)
- Destination D/L TDM: 1 in each D/L TDM
- Insertion Period (max): 0,5 seconds
T AAS-F - NCC_STL_DVB_PAT_010 -
STLF-NA-TRD-REQ-4330 SatLife system shall handle the following category 3 tables: CAT, SDT, BAT,
EIT, RST. Optionally the PAT will belong to this group.
T AAS-F : no PAT in this group
AAS-F - NCC_STL_DVB_CAT_020
AAS-F - NCC_STL_DVB_SDT_020
AAS-F - NCC_STL_DVB_BAT_020
AAS-F - NCC_STL_DVB_EIT_020
AAS-F - NCC_STL_DVB_RST_010
-
STLF-NA-TRD-REQ-4340 SatLife system shall be able to receive sections of the category 3 tables from
the different VSPs.
T AAS-F - NCC_STL_DVB_CAT_020
AAS-F - NCC_STL_DVB_SDT_020
AAS-F - NCC_STL_DVB_BAT_020
AAS-F - NCC_STL_DVB_EIT_020
AAS-F - NCC_STL_DVB_RST_010
-
STLF-NA-TRD-REQ-4350 The MS shall be configured with one PID value per VSP for the reception of
these tables. It is not possible to share the same PID between all the VSPs
because it would not be possible to identify the source of MPEG packets
received by the MS with the same PID containing data and no section
information.
T AAS-F - NCC_STL_SESSION_010
AAS-F -
NCC_STL_MULTICAST_PID_040
-
Vista de pagina 598
1 2 ... 594 595 596 597 598 599 600 601 602 603 604 ... 637 638

Comentarios a estos manuales

Sin comentarios